Bindery Stitchers
for HEAVY-DUTY WORK
 
Model S3A

Model 3SA Stitcher

MODEL S3A 7/8" - The two (2) sheet to 7/8" capacity stitcher

The ISP S3A 7/8" performs like three stitchers in one. It's furnished with three sets of formers and drivers:

  • a set for #25 round wire (2 sheets to 1/4")
  • a set for #20 x #25 flat wire (1/4" to 1/2")*
  • a set for 19 x 21 1/2 flat wire (1/2" to 7/8")

    As a result, the most particular customer will be pleased with perfect stitching on any job from two sheets to 7/8". The unit comes with saddle, flat table and gauges for flat and saddle stitching.

    * Shipped with these parts installed.


    MODEL S3A 1 1/8" - For consistently thick flat work ranging from 1/8" to 1 1/8".

    Features improved cut-off mechanism with carbide tip for #18 x 20# (type 230) high carbon book-binders wire.

    Comes with table and gauges for flat stitching. Saddle is optional. (for use in the 1/8" to 1/4" work range only).

    "Model S3A" Stitcher Manual

    "Model S3A" Stitcher Specifications
     

  • Model N3B

    Model N3B Stitcher

    MODEL N3B2 - 1/2R - Handles big jobs from 1/2" to a maximum of 1 3/4" thick.

    The ISP Model N3B2-1/2R will flat stitch work from a minimum thickness of 1/2" to 1 3/4" maximum depending upon type of paper used. Stitcher is set to use #17 round bookbinders wire.

    MODEL N3B2-1/2H - Our largest capacity stitcher.

    Will flat stitch work from a minimum thickness of 1/2" to 2" maximum, depending upon type of paper used. Equipped with heavy-duty cutter block for #18 x #20 (type 230) high carbon wire. A maximum of 2 3/4" of work can be done by stabbing.

    "Model N3B" Stitcher Specifications

    Home; ProductsSpecials; Installations; Fun Stuff; Contacts; What's New; Sitemap

    This site is best viewed at 1024 x 768 resolution
     Copyright 2004    All rights reserved   Revised: July 06, 2013